Welcome to today’s guide on how to download the Huawei Honor 4A SCL-TL00H firmware flash file and how to install the stock ROM on your phone.
This file can help you reset your phone for bootloop, password reset, hanging, and fix many other problems.
This file is strictly for only Huawei Honor 4A SCL-TL00H.
Downloads:
Firmware name: Huawei_Honor_4A_SCL-TL00H_V100R001C00B251_China_5.1.1_XFT.zip
Huawei Model: Huawei Honor 4A SCL-TL00H
Android version: 5.1
File Size: 839 MB
The Requirements
- A Windows PC
- USB cable
- Xiaomi USB driver
- Xiaomi Flash Tool
- Xiaomi/Redmi firmware files
Flashing Huawei Honor 4A SCL-TL00H Using Xiaomi MI Flash Tool
- Download on your PC the firmware file that you wish to flash to your phone, and extract the file to get the flash files inside.
- Now, download the Xiaomi USB driver, extract the driver, and install it on your PC.
- Download the Xiaomi Flash Tool to your PC, and extract the zip file to get the files below.
- Locate the folder, find XiaoMiFlash.exe, and launch it as an administrator.
- A pop-up will appear asking you to install some drivers; click on “Install” to install the drivers.
- After the driver installation, ready your phone by booting your phone to “download mode.”
- If you face any issue with the above setup, download the installer version that installs on your PC instead.
- To boot your Xiaomi phone to “Download Mode,” first power it off, and while off, press and hold the volume down + power button for a few seconds till “Download Mode” appears.
- On the tool, click “select” to locate the firmware you recently extracted.
- You need to select the “firmware” folder where all the files are located (not the file).
- Next is to connect your phone to the PC using the USB cable, and you will see that the tool has detected your phone.
- Drop your phone and ensure not to interrupt it during flashing.
- For those with an open bootloader, remember to click this at the bottom of the tool to avoid locking it back.
- Click on “flash” to begin the flashing process; the tool will take a few minutes to complete flashing.
- Once the flashing is done, unplug your phone, close the Xiaomi MI Flash Tool, and enjoy the new experience.
